JLG 1030P, Руководство по эксплуатации и безопасности

Страница: 14 / 56

SECTION 1 - SAFETY PRECAUTIONS
1-6
3121789
•
Do not elevate platform while on or near a sloping, uneven, or soft
surface. Ensure machine is positioned on a smooth, firm surface
within the limits of the maximum operating slope before elevating
platform.
• Before operating on floors, bridges, trucks, and other surfaces,
check allowable capacity of the surfaces.
•
Never exceed the maximum platform capacity as specified on the
platform. Keep all loads within the confines of the platform, unless
authorized by JLG.
•
Keep the chassis of the machine a minimum of 2 ft (0.6 m) from
holes, bumps, drop-offs, obstructions, debris, concealed holes,
and other potential hazards at the ground level.
•
Do not operate the machine when wind conditions exceed specifi -
cations shown in Section 5 or as shown on the capacity placard on
the platform billboard. Factors affecting wind speed are; platform
elevation, surrounding structures, local weather events, and
approaching storms.
• Wind speed can be significantly greater at height than at ground
level.
•
Wind speed can change rapidly. Always consider approaching
weather events, the time required to lower the platform, and
methods to monitor current and potential wind conditions.
• Do not cover or increase surface area of the platform or the load.
Do not carry large surface area items in the platform when operat -
ing outdoors. The addition of such items increases the exposed
wind area of the machine. Increased areas exposed to wind will
decrease stability.
• Never operate machine in high wind, rain, or snow.
• Do not perform work that will subject unit to a horizontal force or
create a swaying motion of the platform.
•
Never attempt to use the machine as a crane. Do not tie-off
machine to any adjacent structure. Never attach wire, cable, or any
similar items to platform.
•
If the arm assembly or platform is caught so that one or more
wheels are off the ground, platform personnel must be removed
before attempting to free the machine. Use cranes, forklift trucks,
or other appropriate equipment to stabilize machine.