JF 1600-AT S3, Инструкция по эксплуатации

Страница: 135 / 240

Instructions Manual
15
Never attempt to manually feed
the harvester.
2. Safety
ENGLISH
Use a chopper whenever it is
necessary to manually feed.
The harvester has an articulation system of the
coupling arm to the tractor that allows the
coupling in the rear position (figure beside).
Always use the rear position for opening the
clearance.
IT IS FORBIDDEN TO MANUALLY
FEED THE HARVESTER.
It is the producer (customer) sole responsibility
to plan the planting, so that the right spacing
for the harvest is respected.
JF Máquinas will not be held responsible for
the inadequate use of its equipment. The
harvester must be used only with accordance
with this Manual, any other procedure must
be avoided.
2.8- Clearance
2.8.1- Clearance opening
It is important to plan ahead the clearances,
leaving the necessary gaps in order to allow the
harvester to enter the harvesting area.
We remind you that the harvester has not
been developed and it is not appropriate
to be manually fed. This procedure exposes
high accident risks to people who are
involved. To open the clearance, it must
be used in the rear position of the tractor.
If manual feeding is required, use one of
the silage machines from the JF stationary
line, such as the JF 60 Maxxium.
ATTENTION!