JF 1600-AT S3, Инструкция по эксплуатации, Страница: 204 / 240

84
Instructions Manual
6. Maintenance
ATTENTION!
After adjusting, rotate the rotor manually
by turning one full turn. Observe carefully
if there is no contact between the knives
and the counter knife. IIf necessary, redo
the adjustment as previously described.
Operate the machine with a friction of
knives with counter knife will damage the
machine and could result in the release
of fragments that could hit people and
cause an accident involving personal
injury.
The use of PPE (Personal Protective
Equipment) is mandatory during
operation, maintenance and adjustment
of the machine. Wear suitable gloves and
eye protection. Take special care when
handling knives and counter knife, these
components have sharp areas that can
cause injury if handled without proper
protection and care.
5.
Using the same tool, tighten the bolt (J)
to move the rotor over the shaft, bringing
the knives closer to the counter knife.
6.
Move the rotor seeking a clearence
between the knives and the counter-knife
is not more than 0.5 mm;
7.
Re-tighten the bolt (H);
8.
Mount the knife that has been removed
from the rotor;
9.
After adjustment, mount the machine
cover and the sharpener cover.
MAXIMUM: 0.5 mm
KNIFE
KNIFE
COUNTER-KNIFE
COUNTER KNIFE
J