JF 1600-AT S3, Инструкция по эксплуатации

Страница: 218 / 240

98
Instructions Manual
6. Maintenance
6.8.4- Lubrication with oil
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
Procedure for oil changing:
1.
Place the machine in a flat and level place.
2.
Put an appropriate recipient under the
drain plug so that the dripped oil from
the gearboxes is collected.
3.
Remove the breather plug, the drain plug
and leave the oil drip completely.
4.
Replace the drain plug.
5.
Fill with the recommended oil.
6.
Replace the breather.
Recommended oil: 150/CLP.
Viscosity: ISO 150.
Specification: DIN 51517/3.
Oil Capacity
(
A
) Left Gearbox: 1.5 liter.
( B ) Right Gearbox: 1.5 liter.
Checking the oil level:
Wipe around the level plug on the gearbox.
Loosen the level plug and check that the oil
reaches the hole in the plug.
If necessary, add lubricating oil until it begins
to seep through the hole in the level plug.
Oil Change:
First exchange: after a week or 50 hours of
work, whichever comes first.
Other changes: every year or 500 hours of
work, whichever occurs first.
B
A
6.8.5- Gearboxes (A) and (B)
SUPPLY
LEVEL
DRAIN