manualshive.com logo in svg

Jeanneau SUN ODYSSEY 440, Руководство пользователя, Страница: 228 / 240

Поделиться
Скачать
Jeanneau SUN ODYSSEY 440 Скачать руководство пользователя страница 228

- 228 -

189212 RCD-2

Index C

17.2  INTERIOR WOODWORK

Varnished wooden panels:

The UV varnish used has a matt appearance:

- The acrylic varnish features medium resistance to external chemical damage as well as 

minor scratches.
- Clean regularly with lukewarm soapy water.
- Do not use polish (risk of causing a brighter appearance).
- For scratches, remove the panel and have it re-varnished by your dealer.

The acrylic varnish used has a very matt appearance:

- The acrylic varnish features medium resistance to external chemical damage as well as 

minor scratches.
- The varnished surface tends to get dirty quickly since it is not flat and reveals hollow pores.

NOTE: Vigorously rubbing a varnish surface gives it a brighter appearance.

- Do not use polish (risk of causing a brighter appearance).
- Gently and regularly clean with lukewarm soapy water.
- For scratches, remove the panel and have it re-varnished by your dealer.

Floors:

- The floors fitted onboard are laminated.
- Clean regularly with lukewarm soapy water.
- For scratches, remove the plank and replace it with a new one (consult your dealer).

Содержание SUN ODYSSEY 440

















































































































































































































































Отзывы:

Нет отзывов