manualshive.com logo in svg

Jeanneau SUN ODYSSEY 440, Руководство пользователя, Страница: 226 / 240

Поделиться
Скачать
Jeanneau SUN ODYSSEY 440 Скачать руководство пользователя страница 226

- 226 -

189212 RCD-2

Index C

ALCANTARA (microfibre)

Stain removal

The fabric must be free from dust before removing. To do so, use a vacuum cleaner to achieve 
optimal cleanness.

Rub with a duster soaked in a solution containing ammonia diluted by 10%. Dilute to the 
strength appropriate for this fabric. Try it out first on a hidden corner, the hem for instance, if 
the appearance of the fabric changes, dilute accordingly.

Scrub the Alcantara fabric in all directions, particularly on the stains.

Rinse off the cleaning solution using a damp cloth.

Dry in the open air.

After taking the Alcantara fabric off, it's a good idea to use a soft brush on it to bring back its 
supersoft quality.

For difficult stains, dry-cleaning is recommended.

SYNTHETIC FABRIC

Stain removal

If you can remove the fabric:

- Clean in the washing machine (use the program for delicate fabric) at 30°.
- Do not iron.
- Never use Javel water.
- Do not dry-clean.
- Do not use a clothes drier.

If you cannot remove the fabric:

- Clean with the vacuum cleaner,
- Clean with a foam for synthetic fabrics (see foam use instructions).

Содержание SUN ODYSSEY 440

















































































































































































































































Отзывы:

Нет отзывов