manualshive.com logo in svg

Jeanneau SUN ODYSSEY 440, Руководство пользователя, Страница: 205 / 240

Поделиться
Скачать
Jeanneau SUN ODYSSEY 440 Скачать руководство пользователя страница 205

- 205 -

189212 RCD-2
Index C

15  STEERING SYSTEM

15.1  GENERAL POINTS

- The steering operates by steering cables.
- The steering system is an important safety feature. For this reason, the annual inspection of 

the whole system must be carried out by a professional engineer.

- Regularly check the tension of the steering cables and the tightness of the steering 

components. If need be, adjust the tension of the steering cables. Don't tighten the steering 

cables excessively. When properly adjusted the steering should work smoothly, with no play at 

all and no stiffness in the tiller or wheel (consult your dealer).
- Do not grease the steering cables or the pulleys.
- Maintain the nylon, ertalon or teflon bushes with only a suitable lubricant.
- Each ring is a wearing part: make sure you change them regularly (Please contact your 

dealer).

The textile lines on the boat have a lifetime of 
5 years. Beyond 5 years (the expiry date is 
sewn on the textile lines) the textile lines must 
be changed.

15

STEERING SYSTEM

Содержание SUN ODYSSEY 440

















































































































































































































































Отзывы:

Нет отзывов