Jeanneau SUN ODYSSEY 440, Руководство пользователя, Страница: 148 / 240

- 148 -
189212 RCD-2
Index C
L
OCKING METHOD
It is possible to lock the control buttons to avoid any accidental handling: Press the three
buttons at once: MODE, UP (arrow pointing up), FAN.
LC appears on the screen, which signifies "LOCK".
To unlock and resume use of the buttons, press the three buttons at the same time: MODE, UP
(arrow pointing up), FAN.
UL appears on the screen, which signifies "UNLOCK".
S
CREEN LIGHTING
If the control box is switched off by a fault (in the cabins for example), just touching a button
automatically lights up the screen in a blue colour instantly.
To alter the light intensity of the screen, press the two buttons simultaneously: MODE, UP
(arrow pointing up) until the required intensity is reached.
It is possible to programme whether or not a box is illuminated by default: In this case mode
ON must be selected for a permanently illuminated box or mode SLEEP for a permanently
unilluminated box.
Procedure:
- Simultaneously press the 2 buttons: MODE and DOWN (arrow pointing down).
- With the arrows select n°18 on the menu, then confirm by pressing MODE.
- With the arrows select either ON for illumination by default or SL (SLEEP) to turn the box off.
- The press 2 times on FAN to confirm the selection.
NOTES
- When the system is programmed in dehumidifying mode, the system's safety devices
remain active: if there is an interruption in the flow of sea water or a drop in AC voltage, the
system automatically stops.
- In cooling mode, the system works efficiently when the sea water temperature is below
30 degree C.
- In heating mode, the system works efficiently when the sea water temperature is above
13 degree C.
- It is important to switch the system to HEATING mode at least once a month, to prevent
the crossover cock becoming stuck in COOLING mode.