manualshive.com logo in svg

Jeanneau SUN ODYSSEY 440, Руководство пользователя, Страница: 134 / 240

Поделиться
Скачать
Jeanneau SUN ODYSSEY 440 Скачать руководство пользователя страница 134

- 134 -

189212 RCD-2

Index C

10.2  MICROWAVE

General points

- The microwave is AC powered.
- A breaker protects the electrical circuit.
- The microwave is designed to reheat food and drink or to cook food. Any other use is 

dangerous and forbidden.
- The microwave must never be started when empty.
- Remove all foil or metallic elements of the packaging before putting food in the microwave.
- Remove hermetic coverings from the packaging before putting food in the microwave.

Starting up

- On the switch select the chosen source of current (shore power or generator).
- Put the microwave circuit-breaker in the ON position.

Maintenance

- Regularly check the door seals.
- Regularly clean the inside of the fridge with a damp sponge.

- To remove the microwave from its storage, 

press downwards : the microwave and its 

support will come out upwards.
- To put the microwave away, press it 

downwards until it "clicks"  : the unit is then 

stowed and locked.

NOTE: do not use the microwave when 
it is in stowed position.

Содержание SUN ODYSSEY 440

















































































































































































































































Отзывы:

Нет отзывов