Jeanneau SUN ODYSSEY 440 Скачать руководство пользователя страница 123 | Manualshive

Страница: 123 / 240

Jeanneau SUN ODYSSEY 440 Скачать руководство пользователя страница 123

- 123 -

189212 RCD-2
Index C

9 LIQUEFIED PETROLEUM GAS (LPG) SYSTEM

9.1 GENERAL POINTS

- The working pressure of the LPG unit is 28 millibars
- Recommended cylinder capacity:

Europe Version: 2,75 kg of butane.
US Version: 10 lb of propane.

- Have the hoses, the entire LPG system and the flue pipes in the LPG system inspected

professionally and regularly (or at intervals determined by the national requirements of the

country in which the boat sails), and have them replaced if damage is detected.
- Taps attached to empty cylinders must be closed and disconnected. Protective covers, lids

or caps must be held in place. Spare bottles must be stored outside on the boat, protected from

weather and mechanical damage. Any gas leaks must be only towards the outside of the boat.
- Do not impede access to the components of the LPG system.
- Do not use the housings or the LPG bottle lockers to store other equipment.
- Check the vent pipes at least once a year. Replace them if they have deteriorated or split.

9

LIQUEFIED PETROLEUM GAS (LPG) SYSTEM

«
...
121
122
123
124
125
...
»

Содержание SUN ODYSSEY 440

















































































































































































































































Отзывы:

Нет отзывов