Jeanneau SUN ODYSSEY 440 Скачать руководство пользователя страница 19

Страница: 19 / 240

- 19 -

189212 RCD-2
Index C

If some of those onboard are children, the total number of people allowed onboard may
be increased, provided that:

- The total weight of the children does not exceed 37,5 kg;
and that

- the total weight of all allowed onboard (based on about 75 kg per adult) is not exceeded.

- Do not exceed the recommended maximum number of people onboard.

However many people are onboard, the total, combined load of people and

any gear or equipment must never exceed the recommended maximum load.
- Always use the seats or seating areas provided.

- When loading the boat, never exceed the recommended maximum load.

Always load the boat with care and distribute the loads in order to maintain the

theoretical trim (more or less horizontal).
- Avoid placing heavy loads high up in the boat.

DESIGN CATEGORIES

AND DISPLACEMENT

Содержание SUN ODYSSEY 440

















































































































































































































































Результаты поиска

Содержание SUN ODYSSEY 440

Отзывы:

Jeanneau SUN ODYSSEY 440, Руководство пользователя, Страница: 19 / 240

Результаты поиска

Содержание SUN ODYSSEY 440

Отзывы: