P/N 960-100175R_Rev. 6 {EDP #200824}
© 2016, JAPAN CASH MACHINE CO., LTD.
1 - 6
Section 1
Taiko™ Series Banknote Acceptor General
Information
E
NVIRONMENTAL
S
PECIFICATIONS
Table 1-2
Taiko PUB-7/11 Technical Specifications
Acceptance Rate
*
:
*. When security measures against counterfeiting are implemented, the software may not fulfill the specified acceptance rate level.
95% or greater
†
Note: The following banknote types are excluded:
a) Banknotes with excess or poor magnetism or unclear graphics
b) Double (dual) Notes
c) Worn, dirty, wet, stained, torn or excessively wrinkled Banknotes
d) Banknotes having folded corners or edges
e) Banknotes having the wrong cut dimensions or printing displacement
f) Returned Banknotes because of incorrect or failed insertion.
†. Refer to the Software Information Sheet related to the specific Country's software.
Banknote Types Accepted:
Long side: 120~160mm (4.72~6.3 in.)
Short side: 62~82mm (2.44~3.23 in.)
Barcode Coupon
‡
:
‡. Refer to the Barcode Coupon Specification.
Standard Specification
a) Read code interleaved: 2 of 5
b) Narrow Bar: 0.5mm-0.6mm (0.019-0.023 in.)
c) Wide Bar to Narrow Bar ratio = 3:1
d) Characters: 18 Characters
e) Print Position: Middle (Divide a Coupon equally on the left, right, top and
bottom of the Coupon’s center)
f) Print Width: Wider than 10mm (0.39 in.)
Insertion Direction:
Banknote: Four-way
Barcode Coupon: Two-way (Barcode Surface Up)
Processing Speed
**
:
**.Excluded Host communication time lag. (Power Supply: +12V DC, Temperature: 25ºC ±5ºC)
Approximately 2 seconds (from Banknote insertion to denomination signal
output)
Approximately 3 seconds (from Banknote insertion to credit signal output)
Validation Method:
PUB 7 = Optical (4 wavelength), Transmissive and Reflection
PUB 11 = Optical (4 wavelength), Magnetic, Transmissive and Reflection
Diagnostic Indicators
††
:
††.DIP Switch selectable.
Front Panel Bezel LED, Full color illuminating (Gradation & Solid)
Escrow:
1 note
Anti-stringing Mechanism:
Pull-Back (PB) Unit (Anti-pullback system - JCM Patented)
Interface:
X4: ID-003 (Serial)/MDB/Pulse/ccTalk
01: Parallel (ID-001)
03: Serial (ID-003)
Table 1-3
Taiko PUB-7/11 Environmental Specifications
Operating Temperature:
+5ºC to +50ºC (41ºF to 122ºF)
Storage Temperature:
-20ºC to +60ºC (-4ºF to 140ºF)
Relative Operating Humidity:
20% to 85% RH (non-condensed)
Relative Storage Humidity:
20% to 85% RH (non-condensed)
Visible Light Sensitivity:
Avoid contact with direct sunlight
(Interior lighting must be incandescent with a
Radiant Angle of 15 Degree or more having an Illumination index of 3000 Lux or less)
Installation:
Indoors Only
Specifications
T
ECHNICAL
S
PECIFICATIONS
Hydrothermal Condition Table
Humidity [%RH
]
Temperature [ºC]
Allowable
and Humidity Range
Operating
Temperature
35ºC/85%
50ºC/40%
