Jason International, Inc. •
501.771.4477
Page 15 of 18
Customer Service : 800.255.5766
Copyright © 2011 Jason International.
Figure 9
signAture eDition whirlpool
touChpAD
The Jason Signature Edition Whirlpool digital touchpad is used to access all the functions of the control box used on the
Jason Signature Edition Whirlpool bath.
Customized settings
The 12 character LCD display can be customized by
pressing the two Diagnostic Function icons simultaneously
for five (5) seconds, while the system is off. Note : Use the
above figure to locate the icons. A menu will be displayed
to choose the following: Product Test Diagnostics,
Temperature (F or C) and Language (English or Spanish).
menu instructions
Use the top Diagnostic Function icon to scroll through the
different menu items. Use the bottom Diagnostic Function
icon to change an option. For example, press and release
the top icon to change from Product Test to the Temperature
option. Press and release the bottom icon to change the
temperature display from F (Fahrenheit) to C (Celsius).
product test Diagnostics
After selecting the Product Test option from the menu,
the unit will perform a series of tests to confirm correct
installation of components. The test will begin by displaying
the configuration number, followed by the software revision
number. Next, the auxiliary control box will be tested to
ensure proper IR communication (if applicable). The display
will then test the Temperature and Low Water level sensor
(ITW-209). Next, each of the six (6) icon buttons will begin to
light. Press the illuminated button to proceed to the next icon.
After the icon test, the pump will start for two (2) seconds on
the High setting. Lastly, the LED Light unit will be tested.
If you receive an error on any of the tests, confirm proper
installation of component to the correct control box. (See the
CONTROL BOX CONNECTIONS section).
remote Control
The Signature Edition control system includes a waterproof
floating Universal Remote Control. It controls all bath
functions plus a TV, DVD, CD, etc. which can be heard
through the Sound Immersion Transducers (optional)
.
operAting instruCtions, FeAtures, AnD Controls (cont.)
operAting instruCtions
whirlpool on/off icon
To control the operation of the whirlpool pump motor,
press and release for each setting: High, Medium, Low,
or Off. (For 50Hz controls: ON or OFF) A 20 minute
decreasing timer will be initiated when the pump motor
starts. Press and hold the Pump icon to cycle through each
pump setting. The Pump icon lights when the water is at
operating level and the LCD displays “System Ready”.
The LCD will display “Pump Off”, “Pump High”, “Pump
Medium”, or “Pump Low” when the key is pressed. It also
toggles between Temperature and Timer at 5 second
intervals. “Low Water” is displayed for 5 seconds if no
water is detected.
Jetted neck pillow icon [optional]
To control the operation of the jetted neck pillow, press
and release for each setting, you can set for a constant
flow on both jets, a pulsing flow on both jets, or a pulsing
alternating flow between jets. Press and hold the Pillow
icon to cycle though the various pillow settings. The Pillow
icon will light whenever the pump is running. The solenoids
will open for two (2) minutes to drain during the purge
cycle countdown. The LCD will display “Pillow On”, “Pillow
Pulse1”, “Pillow Pulse2”, or “Pillow Off” while the key is
pressed
leD light icon
Hold the key for less than two (2) seconds to turn the lights
Off or On. Hold the key for more than two (2) seconds to
change modes. The Light icon should remain lit as long as
the bath is connected to a power supply. This function has
a two-hour timer and remembers the last mode. The LCD
displays “Light On” or “Light Off while the key is pressed
for less than two (2) seconds, “Light Cycle” is displayed if
pressed for more than two (2) seconds.
option (“o” icon)
This key is used to control the optional second jetted neck
pillow on the LS640 model. See the Jetted Neck Pillow
section above.
Pillow On/Off
IR for Remote
LED Light
For Diagnostic Functions
For Diagnostic Functions
Option
P
O
Whirlpool On/Off, Speed