Jason International, Inc. •
501.771.4477
Page 10 of 18
Customer Service : 800.255.5766
Copyright © 2011 Jason International.
instALLAtiOn instRuctiOns (cont.)
signAture eDition whirlpool
Jason’s Signature Edition Whirlpool system is the most
advanced bath manufactured by Jason International, Inc.
and features the ultimate in luxury bathing for the leisure
bath industry. The pump control box must be properly
connected for the bath to function correctly.
tHE pump cOntROL BOX
The pump, keypad, LED light, ozone sanitation unit, and
water level/temperature sensor must be plugged into the
proper receptacles for correct operation of the Whirlpool
system.
See Figure 7
for connections: (A) The junction
box for the pump control boxes and heater must be
connected into a 240v, 20 amp GFCI dedicated circuit. (B)
Pre-wired power cords to pump (C) and ozone unit (E).
Eight-pin mini-DIN terminal for installation of Whirlpool
keypad (F). Six-pin mini-DIN terminals for the water/
temperature sensor (D), and LED light (G) to the pump
control box.
siGnAtuRE EDitiOn WHiRLpOOL pARts List
Pump
Pump Control Box
Control Box Stand
Keypad Cable
Keypad
Water Level/Temp Sensor
LED Light Assembly
LED Light Cable
Ozone Sanitation Unit Heater
Figure 7
Note:
This diagram
(Figure 7)
also applies to 50 Hz,
240v controls, and power supply systems. Except that the
Whirlpool pump junction box must be connected into one
dedicated 240v, 20 Amp GFCI circuit.