Appendix-17
GLL (Geographical Position, Latitude / Longitude)
Version 1.5
$GPGLL,ddmm.mm,a,dddmm.mm,a<CR><LF>
1 2 3 4
Version 2.1
$GPGLL,ddmm.mmmm,a,dddmm.mmmm,a,hhmmss.ss,A*hh<CR><LF>
1 2 3 4 5 6
Version 2.3
$GPGLL,ddmm.mmmm,a,dddmm.mmmm,a,hhmmss.ss,A,x*hh<CR><LF>
1 2 3 4 5 6 7
Version 4.0/IEC
$--GLL,ddmm.mmmm,a,dddmm.mmmm,a,hhmmss.ss,A,x*hh<CR><LF>
1 2 3 4 5 6 7
1, 2:
Latitude (deg, min), N / S
3, 4:
Longitude (deg, min), E / W
5:
UTC time (hours, minutes, seconds 1/100 sec fixed at 00)
Measured UTC [1/100 sec] (Version 2.3/4.0/IEC)
6:
Status A = Valid, V = Invalid (When Mode Indicator is not A, D, set it as V)
7:
Mode indicator (Version 2.3/4.0/IEC)
A : GPS positioning
D : DGPS positioning
N : Not positioning
S Simulation mode
Note 1. For version 1.5, when not performing positioning, outputs last measured position data.
For version 2.3/4.0/IEC, when not performing positioning, outputs last measured position data,
date, and time.
For version 2.3/4.0/IEC, when power is turned on, or master reset is performed, the initial
time, date, and position settings are NULL.
VTG (Track Made Good and Ground Speed)
Version 1.5
$GPVTG, xxx.x,T,xxx.x,M,xxx.x,N,,<CR><LF>
1 2 3
Version 2.1
$GPVTG, xxx.x,T,xxx.x,M,xxx.x,N,xxx.x,K*hh<CR><LF>
1 2 3 4
Version 2.3
$GPVTG, xxx.x,T,xxx.x,M,xxx.x,N,xxx.x,K,x*hh<CR><LF>
1 2 3 4 5
Version 4.0/IEC
$--VTG, xxx.x,T,xxx.x,M,xxx.x,N,xxx.x,K,x*hh<CR><LF>
1 2 3 4 5
1:
Course bearing (deg) Note 1
2:
Magnetic bearing (deg) Note 1
3: Speed
(knots)
4: Speed
(km/h)
5:
Mode indicator (Version 2.3/4.0/IEC)
A : GPS positioning
D : DGPS positioning
N : Not positioning
S Simulation mode
P : SBAS positioning
(For IEC only, if version 2.3, 4.0, SBAS positioning is D)
Note 1 Attention for the RMC output (IEC)
When the COS is invalid (SOG less than 1 knot), the COG field only set to null.
Содержание JLR-8400
