Japan Radio Co. JLR-8400 Скачать руководство пользователя

Страница: 106 / 218

4-58

4.13.2 Setting FIX Mode



You can select FIX mode to AUTO, 2D, or 3D.

The selections are as follows:
(1) AUTO:

Positioning mode is automatically switched between 3D and 2D, with the optimal
method being used.

(2) 2D:

2D positioning performed.

(3) 3D:

3D positioning performed.

1. Refer to "4.15.1 Changing to a maintenance mode" and display the maintenance menu.

2. Press the

key to select "SENSOR" and "FIX MODE."

3. Press the

key to select the FIX mode, and then press the

key.

4.13.3 Setting Elevation Mask



If the elevation mask is set, satellites at an elevation lower than the set value will not be used in

positioning.



The elevation mask can be set between 5 and 89 degrees.

1. Refer to "4.15.1 Changing to a maintenance mode" and display the maintenance menu.

2. Press the

key to select "SENSOR" and "ELV MASK."

3. Press the

key to set the Elevation mask value, and then press the

key.

4.13.4 Setting HDOP



If HDOP is set, positioning is only performed if HDOP is lower than the set value.



HDOP can be set to 4, 10, or 20.

1. Refer to "4.15.1 Changing to a maintenance mode" and display the maintenance menu.

2. Press the

key to select "SENSOR" and "HDOP."

3. Press the

key to select the HDOP, and then press the

key.

Procedure

Содержание JLR-8400



























































































































































































































Результаты поиска

Содержание JLR-8400

Отзывы:

Похожие инструкции для JLR-8400

Бренды по названию

Популярные бренды

Japan Radio Co. JLR-8400, Инструкция по эксплуатации

Результаты поиска

Содержание JLR-8400

Отзывы:

Похожие инструкции для JLR-8400

Бренды по названию

Популярные бренды