Japan Radio Co. JLR-8400, Инструкция по эксплуатации

Страница: 201 / 218

Appendix-23
V : Navigational status not valid
Note 1. When not performing position fixing, outputs last measured position data, date, and time.
When power is turned on, or master reset is performed, the initial time, date, and position
settings are NULL.
Note 2 "+" is not output. (IEC)
 APB (Heading/track controller)
Version 1
．
5
$GPAPB, A,, x.xx, a, N, A,, xxx, a, cccc, xxx, a,,<CR><LF>
1 3 4 5 7 8 9 10 11
Version 2
． 1
$GPAPB, A,, x.xx, a, N, A,, xxx, a, c--c, xxx, a,,*hh<CR><LF>
1 3 4 5 7 8 9 10 11
Version 2
． 3
$GPAPB, A,A, x.xx, a, N, A, , xxx.x, a, c--c, xxx.x, a,,, a*hh<CR><LF>
1 2 3 4 5 7 8 9 10 11 12
Version4
． 0 ， IEC
$--APB, A,A, x.xx, a, N, A, A, xxx.x, a, c--c, xxx.x, a,,, a*hh<CR><LF>
1 2 3 4 5 6 7 8 9 10 11 12
1:
Status A = Data Valid
V = Data Invalid
2: Status A = OK or not used (Version 2.3/4.0/IEC)
V = Loran-C cycle lock warning flag
3:
Magnitude of XTE
4: Direction to steer, L / R
5: Status A = Arrival circle entered V = Arrival circle not passed
6: Status A = Perpendicular passed at waypoint (Version 4.0/IEC)
V = Perpendicular not entered
7, 8: Bearing origin to destination, M / T
9: Destination waypoint ID
10, 11: Bearing, present position to destination, M / T
12:
Mode indicator (Version2.3,/4.0/IEC)
A : GPS positioning
D : DGPS positioning
N : Not positioning
S : Simulation mode
 BOD (Bearing origin to destination)
Version 1.5
$GPBOD,x.x,T,x.x,M,c--c,c--c<CR><LF>
1 2 3 4
Version 2.1,2.3
$GPBOD,x.x,T,x.x,M,c--c,c--c*hh<CR><LF>
1 2 3 4
Version 4.0,IEC
$--BOD,x.x,T,x.x,M,c--c,c--c*hh<CR><LF>
1 2 3 4
1:
Bearing, degrees true
2: Bearing, degrees magnetic
3: Destination waypoint ID
4: Origin waypoint ID