background image

SUMMARY

REVISION OF THE MANUAL.................................................................................3

INTRODUCTION.....................................................................................................4

1  

 LEGEND OF THE SYMBOLS USED.................................................................5

2  

 SPECIFIC SAFETY RULES FOR INSTALLING TMD MK0...............................7

2.1  

 Glossary..................................................................................................................7

2.2  

 General Rules..........................................................................................................8

2.3  

 Operator Safety.......................................................................................................9

2.4  

 Device Safety........................................................................................................10

2.5  

 Safety during the Installation.................................................................................11

3  

 OPERATION OF THE RADIO DEVICES.........................................................12

4  

 ENVIRONMENTAL INFORMATION................................................................13

5  

 REGULATORY INFORMATION.......................................................................14

6  

 TMD MK0.........................................................................................................15

7  

 DESCRIPTION.................................................................................................16

8  

 TECHNICAL FEATURES.................................................................................17

9  

 TMD MK0 INSTALLATION AND POWER SUPPLY........................................19

9.1  

 Indications if not used for a long time....................................................................22

10  

 ACTIVATION AND CONFIGURATION..........................................................23

10.1  

 Activation through MK3Starter.............................................................................23

10.2  

 Configuration through the Portal..........................................................................23

11  

 MAINTENANCE.............................................................................................24

12  

 LEGAL NOTICES...........................................................................................25

1

Содержание TMD MK0


























Отзывы: