(A)
5 mm
Adjusting Upper Shaft Clutch Solenoid
The space between the plunger and the upper surface of the yoke should be 5 mm.
1. Remove the belt cover.
2. Loosen the 2 screws (A) and move the yoke (1) up or
down to make a space of 5 mm between the snap ring
(2) of the plunger and the upper surface of the yoke.
3. Tighten the screws (A).
4. Attach the belt cover.
To adjust:
(1)
(2)
37
5 mm
(Gauge 860G001)
www.promelectroavtomat.ru
