(B)
(A)
3 mm
Adjusting Needle Threader Switch
Adjust the upper switch position as follows if the instructional display will not disappear.
1. Remove the 2 screws (A) and remove the motor
cover (1).
2. Loosen the screw (B) and adjust the position of the
switch (2) by moving it up or down so that the needle
threader stops with a 3 mm gap (3) between the slider
(4) and the top end of the guide slot.
3. Attach the motor cover with the 2 screws (A).
(1)
(A)
(2)
(4)
29
3 mm
(3)
(Gauge 860G001)
www.promelectroavtomat.ru
