janitza UMG 605 PRO, Руководство пользователя и технические данные

Страница: 45 / 87

www.janitza.de
UMG 605-PRO
40
11. 6 Ethernet configuration
Static IP address
In simple networks with no DHCP serv-
er, the network address must be set right
on the device itself.
BootP
BootP enables the device to be integrated
into an existing network fully automatically.
However, BootP is an older protocol and
does not provide the scope of functions
provided by DHCP.
DHCP mode
DHCP makes it possible integrate a
UMG 604-PRO into an existing network
fully automatically without the need
for any additional configuration. When
started, the device automatically obtains
the IP address, the subnet mask and
the gateway from the DHCP server.
The device is factory-set to the “DHCP
client”.
Zeroconf
Zeroconf enables a UMG 605PRO to
be automatically integrated (IP address
assignment) into an existing network without
a DHCP server.
m
CAUTION!
Damage to property due to
incorrect network settings
Incorrect network settings can cause faults
in the IT network.
Obtain information from your network
administrator about the correct settings
for your device.
Fig. Connection example, the UMG 604PRO and PC
require a static IP address.
Switch
Patch cable Patch cable
PC UMG
605PRO
Fig. Connection example, the UMG 604PRO and PC are
automatically assigned an IP address by a DHCP server.
Patch Cable
Patch cable Patch cable
DHCP
server
PC UMG
605PRO
Switch
Address Settings
205 DHCP mode
0 = static IP
1 = BootP
2 = DHCP client
3 = Zeroconf
300 IP address, xxx --- --- ---
301 IP address, --- xxx --- ---
302 IP address, --- --- xxx ---
303 IP address, --- --- --- xxx
304 IP mask, xxx --- --- ---
305 IP mask, --- xxx --- ---
306 IP mask, --- --- xxx ---
307 IP mask, --- --- --- xxx
310 IP gateway, xxx --- --- ---
311 IP gateway, --- xxx --- ---
312 IP gateway, --- --- xxx ---
313 IP gateway, --- --- --- xxx