janitza UMG 605 PRO, Руководство пользователя и технические данные

Страница: 20 / 87

UMG 605-PRO
www.janitza.de
15
6. Installation
6. 1 Disconnectors
During building installation, provide a suitable
disconnector in order to disconnect
the device from the current and voltage.
• Install the disconnector close to the device
so that it is easily accessible to the user.
• Label the switch as a disconnection device
for this device.
6. 2 Supply voltage
The device requires supply voltage
to operate.
Before connecting the supply voltage, ensure
that the voltage and frequency correspond to
the details on the rating plate!
The connection lines for the supply voltage
must be protected using a UL-listed fuse
or a circuit breaker.
c
WARNING!
Risk of injury due
to electric voltage!
Severe bodily injuries or death can occur
due to
• touching bare or stripped wires that are
live,
• device inputs that are dangerous
to touch.
Therefore, note the following:
•
De-energise your system before
starting the work!
•
The inputs for the supply voltage are
hazardous if touched!
m
CAUTION!
Damage to property
due to not observing
the connection conditions
Failure to observe the connection conditions
can damage or destroy your device.
Therefore, note the following:
• Adhere to the specifi cations for voltage
and frequency on the rating plate.
• Connect the supply voltage via a fuse
in accordance with the technical data.
• Do not connect the supply voltage
to the voltage transformers.
Supply voltage
Uh
Isolation device
Fuse
Fig. Example connection for the supply voltage Uh.
C
NOTE!
Devices that can be operated with DC
voltage are protected against polarity
reversal.