janitza UMG 605 PRO, Руководство пользователя и технические данные

Страница: 41 / 87

www.janitza.de
UMG 605-PRO
36
10. 3 Programming mode
You view and change the most important
settings required to operate the device
in programming mode.
The addresses for the most important
settings are provided in section “17.
Parameter list”.
You can make further settings in the GridVis®
software supplied.
Pressing and holding buttons 1 and 2
simultaneously for approx. 1 second
takes you to programming mode after
the password prompt.
If no display password has been set up, you
are taken directly to the first programming
menu.
Programming mode is indicated on screen
by the text "PRG". The digit in the address
flashes. If you are in programming mode and
no button is pressed around 60 seconds or
if buttons 1 and 2 are pressed simultaneously
for around 1 second, the device returns to
display mode.
Fig. Display example for "Programming mode", address
000 with a content of 5,000.
Fig. Request window for the display password
Address Content
PRG
10. 4 Display password
To make it harder to accidentally modify
the programming data on the device,
you can program a 4-character display
password. No display password is factory-
set. No display password is requested
in the factory default setting.
10. 5 Homepage password
You can password-protect access to the device’s
homepage. No homepage password is factory-set.
The device differentiates between 3 password
modes for the homepage password:
• 0 = The homepage password is
not requested.
• 2 = Changes to the configuration and
the measured values display require
the password to be entered once.
• 128 = Each change to the configuration
requires the password to be entered again
C
NOTE!
If you no longer remember your
password, you can only change
it using the GridVis® software.
(see www.janitza.de)
Content
PRG
Addr. Contents
500 Display password
0 = The password is
not requested.
501 Homepage,
password mode
502 Homepage password
Fig. Excerpt from the parameter list.