background image

UMG 605-PRO

www.janitza.de

11

5. 

Network systems

Three-phase four-

conductor systems

with earthed neutral 

conductor

Three-phase four-

conductor systems

with non-earthed neutral 

conductor (IT networks)

Three-phase three-
conductor systems

not earthed

Three-phase three-
conductor systems

with earthed phase

L1
L2

L3
E

E

N

E

L1
L2

L3
E

N

R

L1

L2
L3
E

E

L1

L2
E

E

L

N
E

E

L1

L2
L3
E

E

L1

L2

N

E

E

L1
L2

L3
E

E

N

E

L1
L2

L3
E

N

R

L1

L2
L3
E

E

L1

L2
E

E

L

N
E

E

L1

L2
L3
E

E

L1

L2

N

E

E

L1
L2

L3
E

E

N

E

L1
L2

L3
E

N

R

L1

L2
L3
E

E

L1

L2
E

E

L

N
E

E

L1

L2
L3
E

E

L1

L2

N

E

E

L1
L2

L3
E

E

N

E

L1
L2

L3
E

N

R

L1

L2
L3
E

E

L1

L2
E

E

L

N
E

E

L1

L2
L3
E

E

L1

L2

N

E

E

U

L-N

 / U

L-L

277 VLN / 480 VLL

U

L-N

 / U

L-L

277 VLN / 480 VLL

U

L-L

480 VLL

U

L-L

480 VLL

Dual-phase two-conductor 

systems

not earthed

Single-phase two-

conductor systems

with earthed neutral conductor

Separated single-phase 

three-conductor system

with earthed neutral conductor

The device can be 
used:

• in 2-, 3- 

and 4-conductor 
networks (TN, TT 
and IT networks).

• in domestic and 

industrial settings.

L1
L2

L3
E

E

N

E

L1
L2

L3
E

N

R

L1

L2
L3
E

E

L1

L2
E

E

L

N
E

E

L1

L2
L3
E

E

L1

L2

N

E

E

L1
L2

L3
E

E

N

E

L1
L2

L3
E

N

R

L1

L2
L3
E

E

L1

L2
E

E

L

N
E

E

L1

L2
L3
E

E

L1

L2

N

E

E

L1
L2

L3
E

E

N

E

L1
L2

L3
E

N

R

L1

L2
L3
E

E

L1

L2
E

E

L

N
E

E

L1

L2
L3
E

E

L1

L2

N

E

E

U

L-L

480 VLL

U

L-N

480 VLN

U

L-N

 / U

L-L

277 VLN / 480 VLL

Suitable network systems and maximum rated voltages (DIN EN 61010-1/A1):

c

WARNING!

Risk of injury due 
to electric voltage!

If the device is subjected to measurement 
voltage surges higher than the permissible 
overvoltage category, safety-relevant 
insulations in the device can be damaged, 
which means that the product’s safety can 
no longer be guaranteed.

Only use the device in environments 
in which the permissible measurement 
voltage surge is not exceeded.

Содержание UMG 605 PRO
























































































Отзывы: