Jakka CONTROL KIT 5, Руководство пользователя

Страница: 8 / 28

TR
J.) SELECTING TEMPERATURE CONTROL POINT
There are 4 options that unit can check the temperature;
-Room thermostate
-Return Air
-Supply Air
-Outside Air
To select one of these;
•
Press UP and DOWN buttons simultaneously
•
Enter service menu password by using UP and DOWN and press Mode/OK .
•
Note: Service menu password is
“58”
•
Then go to Parameter ‘’118’’ by using
UP and DOWN buttons then press Mode/OK button
•
Change the parameter by using UP and DOWN buttons then press Mode/OK button.
Parameter 118 could be one of below numbers
0-Room thermostate
1-Return Air
2-Supply Air
3-Outside Air
•
Get out of menu by pressing ON/OFF button
Note: Selected sensor should be connected to the card . If not, there
will be “- -“ symbol on the screen.