Jakka CONTROL KIT 5, Руководство пользователя

Страница: 24 / 28

TR
In this scenario, unit supplies fresh air to environment and exhaust stall air. This scnario has only manual mode. Supply
and exhaust fans can be set seperately in 6 different speeds via room thermostate . Room thermsotate shows
temperature of inner space where it is already located.
Note;
The electrical board comes with Scenario Number 4 as default.
To change the scenario please follow the steps defined in
‘’Changing the Scenario’’
When Scenario 1 is selected , unit is ready to work as standard heat recovery.
In this mode; exhaust and supply fans and after heater can be controlled.
Temperature is measured by room thermostate
•
If room temperature is measured below set value, temperature will be increased by using after heater
•
If room temperature is measured above set value,, temperature will be dccreased by shutting down the steps
of after heater till room thermostate readsroom temperature equal to set value
Note;
The electrical board comes with Scenario Number 4 as default.
To change the scenario please follow the steps defined in
‘’Changing the Scenario’’
When Scenario 2 is selected , unit is ready to work as
Heat Recovery with 3 Steps Electrical Heater (With Fresh Air Damper)
In this mode; exhaust and supply fans and after heater can be controlled.
Temperature is measured by room thermostate
•
If room temperature is measured below set value, temperature will be increased by using after heater
•
If room temperature is measured above set value,, temperature will be dccreased by shutting down the steps
of after heater till room thermostate readsroom temperature equal to set value
Note;
The electrical board comes with Scenario Number 4 as default.
To change the scenario please follow the steps defined in
‘’Changing the Scenario’’
When Scenario 3 is selected , unit is ready to work as
Heat Recovery with 3 Steps Electrical Heater (With By-Pass Damper)
Scenario
1. Standard Heat Recovery
Scenario
2.
Heat Recovery with 3 Steps Electrical Heater (With Fresh Air Damper)
Scenario
3.
Heat Recovery with 3 Steps Electrical Heater (With By-Pass Damper)