JAI VIS-CAM System, Руководство по установке

Страница: 60 / 112

VIS-CAM Systems
48 Appendix A
Description: 100 Mb Ethernet interface. The signal must be connected to a gigabit Ethernet switch for best
performance. The cable must be a Cat 5e or preferably a Cat 6 cable. The wire color marking on the PCB is
standard Ethernet wire colors.
5.2.4 (b) Power input
Voltage24VDC±20%
Current0.3A with heaters and LED light off
Max currentinrush app 2.5A
Heaters on 1.3A totally
5.2.5 Connector physical Interface
Figure 48. Physical interface table.
Pin Signal Description
Connection to
J-Panel X1
or X2
Remarks
1 Ethernet A+ Ethernet signal to gigabit switch pin 1 Cat5e/6 cable white/orange
2 Ethernet A- Ethernet signal to gigabit switch Pin 2 Cat5e/6 cable orange
3 Ethernet B+ Ethernet signal to gigabit switch Pin 3 Cat5e/6 cable white/green
4 Ethernet B- Ethernet signal to gigabit switch Pin 4 Cat5e/6 cable green
5 Ethernet C+ Ethernet signal to gigabit switch Pin 5
Cat5e/6 cable white/blue
not used with VIS CAM
6 Ethernet C- Ethernet signal to gigabit switch Pin 6
Cat5e/6 cable blue
not used with VIS CAM
7 Ethernet D+ Ethernet signal to gigabit switch Pin 7
Cat5e/6 cable white/brown
not used with VIS CAM
8 Ethernet D- Ethernet signal to gigabit switch Pin 8
Cat5e/6 cable brown
not used with VIS CAM
9 Gnd Power ground Pin 9 Black wire in Red/Black pair
10 +24V dc Supply voltage Pin 10 Red wire in Red/Black pair
11 Vinit + Balanced trigger pulse positive Pin 11 Red wire in Red/Black pair
12 Vinit - Balance tripper pulse negative Pin 12 Black wire in Red/Black pair
13 RS485 Data+ for Lane Controller Pin 13 Brown wire in Brown/Black pair
14 RS485D- RS485 Data- for Lane Controller Pin 14 Black wire in Brown/Black pair
15 RS485 Data+ for Lane Controller Pin 15 Orange wire in Orange/White pair
16 RS485D- RS485 Data- for Lane Controller Pin 16 White wire in Orange/White pair