JAI VIS-CAM System, Руководство по установке

Страница: 3 / 112

Disclaimer iii
VIS-CAM Systems
Notice
The material contained in this manual consists of information that is proprietary to JAI Inc., and may only be
used by the purchasers of the product. JAI Inc. makes no warranty for the use of its product and assumes no
responsibility for any errors which may appear or for damages resulting from the use of the information
contained herein. JAI Inc. reserves the right to make changes without notice.
Microsoft, Windows XP, Windows 2000, Windows 98, Windows NT, and Windows Explorer are either registered
trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
Warranty
Each JAI product is warranted to be free from defects in material and workmanship under normal intended use
and service if installed in accordance with this manual. The warranty period is 2-years and begins on the date
of shipment from JAI stock.
This warranty shall not apply to repairs or replacements necessitated by any cause beyond the control of JAI,
including but not limited to, 1) improper installation, 2) acts of nature, 3) accidents, 4) misuse, 5) lack of
proper maintenance, 6) unauthorized repairs or modifications.
Be advised, that you need to obtain an RMA number from JAI before returning units for warranty repair.
Certifications
CE Compliance
The TS-4032EN, TS-2030EN, TS-1327EN and TS-9720EN series of cameras have been certified to conform to the
requirements of Council Directive 89/336/EC for electromagnetic compatibility and to comply with the
following European Standards:
Emissions: EN 55022A: 1998 + A1: 2000 + A2: 2003
Immunity: EN55024: 1998 + A1: 2001 + A2: 2003
All JAI products bearing the CE mark have been declared to be in conformance with the applicable EEC Council
Directives. However, certain factory-installed options or customer-requested modifications may compromise
electromagnetic compatibility and affect CE compliance. Please note that the use of interconnect cables that
are not properly grounded and shielded may affect CE compliance.
Contact JAI Applications Engineering Department for further information regarding CE compliance.
FCC
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area may cause harmful interference, in which case the user will be required to correct the interference at his
own expense.