JAI VIS-CAM System, Руководство по установке

Страница: 108 / 112

VIS-CAM Systems
96 Appendix I
please use “interpacket delay” register.
“
One
”: Wait for a single Ethernet or HW TTL trigger. Snapshot a single image as
soon as the next trigger is received.
“ All ”: Continuously wait for Ethernet or HW TTL trigger. Display images as soon
as the trigger is received. Click “Freeze” to stop this operation.
“Last”: Same as “All”, except that the software displays the last image captured
as soon as “Last” button is clicked.
NOTE: Flash is disabled in Live mode.
UDP image is sent to the single client who sends the last command (Snap, Live, One, All, Last). No duplicated
image is sent to other clients. However, please note that while this TEST PORT is activated, the camera does
not send images to the FTP server or JAI ImageServer, and therefore, the normal transaction halts.
13.3 3. TCP image (CONTROL PORT)
If “Freeze” button is selected, the camera stops sending UDP images (TEST PORT), and therefore, the camera
sends TCP images via CONTROL PORT, or FTP images to FTP server.
If you want to receive the TCP image to the ENSetup software, make sure to select “Use TCP/IP” under View
menu. Select “Freeze” button.
Whenever the camera receives a next trigger, whether this is Ethernet trigger or TTL trigger, or whether this is
from Lane controller or from ENSetup software (“Eth Trigger” or “Rep. Trigger” button), the camera captures
the image and sends to all clients, which are both lane controller and ENSetup software.
Same image is sent to FTP server as well.
If you wish to monitor the image of the camera outside of camera’s subnet, the router may block the UDP
image. Using this TCP image, the ENSetup software can receive image even if your host PC is outside of the
router or camera’s subnet.
Again, the side effect is that the lane controller receives the same copy messages from or for the ENSetup
software (command, image, etc.) In other words, the lane controller receives big chunk of image data, even if
it is not expected. This is a copy of TCP image data that are sent to the ENSetup software, and the lane
controller can simply trash such image data, as the same image is sent to FTP server any way. (FTP image is
never duplicated, no matter how many clients are connected to the camera.)