JAI SP-5000M-PMCL Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 106

background image

SP-5000M-PMCL / SP-5000C-PMCL

- 67 -

8.7 ALC

In the SP-5000-PMCL, auto gain, auto shutter and auto iris functions can be combined to provide
a wide ranging automatic exposure control from dark to bright or vice versa. The functions are
applied in the sequence shown below and if one function is disabled, the linkage between the
other two is maintained.

In order to make the ALC function effective, set the Auto Iris Lens Control Signal Output to “ON”.
The auto iris function works together with AGC and Exposure Auto.

If the lighting condition is changed from bright to dark AIC ― ASC ― AGC
If the lighting condition is changed from dark to bright AGC ― ASC ― AIC

Fig.44 ALC function concept

ALC Reference will determine the target video level for AGC, Auto Shutter and/or Auto iris. For
instance, if ALC Reference is set to 100% video level, AGC, Auto Shutter and/or Auto iris will
function to maintain 100% video level.

8.8 HDR (High Dynamic Range) (SP-5000M-PMCL only)

HDR sensing mode can be set when HDR Mode is set to ON while Exposure Mode is Timed.
The parameters to configure dynamic range are HDR_SLOPE Level 1, Level 2, Level 3 and Level 4.
The user can select any one of those parameters as required for their application.
In this mode, the timed exposure is used as the reference and the value selected in
HDR_SLOPE will compensate to get an appropriate dynamic range by changing the exposure
time.

Notes:
1.

If the exposure mode is OFF and the HDR mode is set to ON, the exposure mode is
automatically changed to Timed.

2.

If horizontal binning and/or vertical binning are set to ON, the HDR mode cannot be set.
In this case, the HDR mode must be set first before H-Binning and/or V-Binning are set.

3.

In this mode, exposure overlapped behavior is not available and the frame rate is slower than

Gain is fixed at Min.

Dark　　　　　　　　　　 Light changes　　　　　　　　　 Bright

Auto Shutter

Max

Auto shutter operation

Max ～ Min (User set)

Auto Shutter

fixed at Min

Iris diaphragm fixed (Open)

Auto iris

operation

AGC works:

Auto shutter works:

Auto iris works:

AGC operation

Max ～　Min (User set)

AGC

Max

Iris stops just

before close

Operation if light changes
from dark to bright

Operation if light changes
from bright to dark

«
...
67
68
69
70
71
...
»

Содержание SP-5000M-PMCL











































































































Отзывы:

Нет отзывов

Похожие инструкции для SP-5000M-PMCL

MyDlink DCH-S150

Бренд: D-Link Страницы: 8

Бренд: EasyN Страницы: 11

Бренд: C&K systems Страницы: 28

Бренд: C&K systems Страницы: 2

DUAL TEC DT-900 Series

Бренд: C&K systems Страницы: 2

Бренд: C&K systems Страницы: 40

Бренд: Yale Страницы: 24

Бренд: Yale Страницы: 2

Бренд: Yale Страницы: 2

Бренд: M-system Страницы: 9

Бренд: Aigis Mechtronics Страницы: 20

Бренд: König Страницы: 51

Бренд: Grundig Страницы: 98

Бренд: M+S Страницы: 2

Бренд: Falltech Страницы: 8

Бренд: Castle Care-Tech Страницы: 56

Бренд: Vitek Страницы: 16

Бренд: Iget Страницы: 68

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды