Setting range
Default value
Description
Configure analog control settings.
Off, On
Off
In IndividualGainMode, RGB can be configured individually for the entire
gain adjustment range of the sensor.
ー
AnalogAll
Select the gain to configure.
[Setting range]
When IndividualGainModeOn:
DigitalRed, DigitalBlue, AnalogRed, AnalogGreen, AnalogBlue
When IndividualGainModeOff:
DigitalRed, DigitalBlue, AnalogAll, AnalogRed, AnalogBlue
Gain
ー
x 1.0
Set the gain value for the gain setting selected in [GainSelector].
0:Off,
1:Once,
2:Continuous
Off
Enable/disable gain auto adjustment.
[Once] automatically changes to [Off] when the signal level converges once.
0:All,
1:Red,
3:Blue
All
Select the black level to configure.
BlackLevel
All, -133〜255
Red, -64〜 64
Blue -64〜 64
All, 0
Red, 0
Blue 0
Set the black level value.
0:Off,
1:Once,
2:Continuous,
3:Preset3200K,
4:Preset5000K,
5:Preset6500K,
6:Preset7500K
Off
Enable/disable auto white balance.
ー
ー
Select the area for which to configure [BalanceWhiteAutoAreaEnable].
[Setting range]
15:HighLeft, 14:HighMidLeft, 13:HighMidRight, 12:HighRight,
11:MidHighLeft, 10:MidHighMidLeft, 9:MidHighMidRight, 8:MidHighRight,
7:MidLowLeft, 6:MidLowMidLeft, 5:MidLowMidRight, 4:MidLowRight,
3:LowLeft, 2:LowMidLeft, 1:LowMidRight, 0:LowRight
BalanceWhiteAutoAreaEnable
True, False
Enable/disable the photometry area selected in
[BalanceWhiteAutoAreaSelector].
True, False
True: Operate BalanceWhiteAuto with all areas designated as photometry
areas, regardless of the individual enabled/disabled photometry area states
configured in [BalanceWhiteAutoAreaSelector].
False: Operate BalanceWhiteAuto according to the individual
enabled/disabled photometry area states configured
in [BalanceWhiteAutoAreaSelector].
1 to 8
4
Set the response speed for BalanceWhiteAuto. (8 is the fastest)
ー
ー
Display the results of BalanceWhiteAuto.
0: Idle (Balance White Auto is not executed yet.)
1: Processing (Balance White Auto is processing.)
2: Converging (Balance White Auto is converging.)
3:Succeeded (Balance White Auto was Succeeded.)
4: Error1 (G image was too bright)
5: Error2 (G image was too dark)
6: Error3 (Timeout error has occurred. Please try again.)
7: Error4 (Could not processing.)
8: Error5 (R or B image was out of range.)
0.45, 0.5, 0.55, 0.6, 0.65,
0.75, 0.8, 0.9, 1.0
0.45
Set the gamma value.
0:Off,
1:Gamma,
2:LUT
Off
Select the LUT mode.
IndividualGainMode
LUTMode
Gamma
GainSelector
AnalogControl
BalanceWhiteAutoAreaSelector
GainAuto
BalanceWhiteAuto
BlackLevelSelector
BalanceWhiteAutoAreaEnableAll
BalanceWhiteAutoSpeed
BalanceWhiteAutoResult
Item
—
61
—
AP-3200T-10GE