Setting range
Default value
Description
Configure LUT settings.
Red, Green, Blue
Red
Select the LUT channel to control.
0〜256
0
Set the LUT index table number.
LUTValue
0〜4095
Gamma≒1.0
Set the LUT value.
Configure AutoLevelControl.
30 〜 95
50
Set the target level for ALC. (unit: %)
ー
ー
Select the area for which to configure [ALCAreaEnable].
[Setting range]
15:HighLeft, 14:HighMidLeft, 13:HighMidRight, 12:HighRight,
11:MidHighLeft, 10:MidHighMidLeft, 9:MidHighMidRight, 8:MidHighRight,
7:MidLowLeft, 6:MidLowMidLeft, 5:MidLowMidRight, 4:MidLowRight,
3:LowLeft, 2:LowMidLeft, 1:LowMidRight, 0:LowRight
ALCAreaEnable
True, False
True
Enable/disable the photometry area selected in [ALCAreaSelector].
True, False
True
True: Operate ALC with all areas designated as photometry areas,
regardless of the individual enabled/disabled photometry area
states configured in [ALCAreaSelector].
False: Operate ALC according to the individual enabled/disabled
photometry area states configured in [ALCAreaSelector].
1 〜 8
4
Set the response speed for ALC. (8 is the fastest.)
ー
Idle
Allows confirmation of the current operation area during ALC operation.
100 〜
ー
Set the minimum value for the ExposureTime control range
101 〜
ー
Set the maximum value for the ExposureTime control range
1 〜 15
1
Set the minimum value for the GainAuto control range
2 〜 16
16
Set the maximum value for the GainAuto control range
RGB, XYZ, HSI
RGB
Set the output image format.
Off, sRGB, AdobeRGB,
UserCustom
Off
Set the detailed mode when RGB is selected for the color space.
ー
ColorMatrixR-R
Select the ColorMatrix setting component.
[Setting range]
ColorMatrixR-R, ColorMatrixR-G, ColorMatrixR-B
ColorMatrixG-R, ColorMatrixG-G, ColorMatrixG-B
ColorMatrixB-R, ColorMatrixB-G, ColorMatrixB-B
ColorMatrixValue
-2.0 〜 2.0
ー
Set the Color Matrix value.
[
Initial value]
ColorMatrixValue [ColorMatrixR-R] = 1.0
ColorMatrixValue [ColorMatrixR-G] = 0
ColorMatrixValue [ColorMatrixR-B] = 0
ColorMatrixValue [ColorMatrixG-R] = 0
ColorMatrixValue [ColorMatrixG-G] = 1.0
ColorMatrixValue [ColorMatrixG-B] = 0
ColorMatrixValue [ColorMatrixB-R] = 0
ColorMatrixValue [ColorMatrixB-G] = 0
ColorMatrixValue [ColorMatrixB-B] = 1.0
0:Off, 1:On
Enable/disable VideoProcessBypass mode.
True, False
Enable/disable EdgeEnhancer.
0:Low, 1:Middle,
2:High, 3:Strong
True, False
Enable/disable ColorEnhancer.
Red, Cyan, Green,
Magenta, Blue, Yellow
Index for advanced ColorEnhancer settings.
ColorEnhancerValue
0 〜 1
0
Specify the ColorEnhancer emphasis levels for each color component.
LUTIndex
LUTSelector
ALCControlReference
ALCControlChannel
Color Transformation Control
ColorTransformationMode
ColorMatrixValueSelector
Imaging Control
VideoProcessBypassMode
EdgeEnhancerEnable
EdgeEnhancerLevel
ColorEnhancerEnable
ColorEnhancerSelector
ColorTransformationRGBMode
Item
AutoLevelControl
ALCReference
ALCAreaSelector
GainAutoControlMax
ExposureAutoControlMax
GainAutoControlMin
ALCControlSpeed
ALCAreaEnableAll
ExposureAutoControlMin
LUTControl
AutoControlStatus
—
62
—
AP-3200T-10GE