Setting range
Default value
Description
Configure settings for digital input/output.
ー
Line2
Select the input/output to configure.
[Setting range]
20: Line1, 21: Line2, 22: Line3, 23: Line4, 24: Line5
25: Line6, 27: Line8, 29: Line10
53: Nand0In1, 54: Nand0In2, 55: Nand1In1, 56: Nand1In2
63: TimeStampReset
LineMode
0: Input,
1: Output,
2: InternalConnection
ー
Display the input/output status (whether it is input or output).
LineInverter
True, False
False
Enable/disable polarity inversion for the selected input signal or output
signal.
LineStatus
True, False
ー
Display the status of the input signal or output signal
(True: High, False: Low).
LineStatusAll
ー
ー
Display the input/output signal status. The state is shown with 16 bits. Bit
assignments are as follows.
[0]:Line1, [1]:Line2, [2]:Line3, [3]:Line4
[4]:Line5, [5]:Line6, [6]: - , [7]:Line8
[8]: -, [9]:Line10, [10]:- , [11]:-
[12]: -, [13]:-, [14]:- , [15]:-
LineSource
ー
ー
Select the line source signal for the item selected in [Line Selector].
[Setting range]
0:Off (LineSelector=TimestampReset Only)
1:AcquisitionActive-Source0, 45:AcquisitionActive-Source1. 57:AcquisitionActive–Source2,
2:FrameActive-Source0, 46:FrameActive-Source1, 58:FrameActive–Source2,
4:ExposureActive-Source0, 48:ExposureActive-Source1, 60:ExposureActive–Source2
5:FVAL-Source0, 49:FVAL-Source1, 61:FVAL–Source2
6:LVAL-Source0, 50:LVAL-Source1, 62:LVAL–Source2
43:AcquisitionTriggerWait-Source0, 51:AcquisitionTriggerWait-Source1,
63:AcquisitionTriggerWait-Source2,
44:FrameTriggerWait-Source0, 52:FrameTriggerWait-Source1, 64:FrameTriggerWait-Source2
7-10:PulseGenerator0-3, 11-14:UserOutput0-3
23:Line4 TTL In1, 24:Line5 Opt In1, 25:Line6 Opt In2, 29:Line10 TTL In2
36:Nand0 Out, 37:Nand1 Out
40:- (Not selectable for Output)
41:Low, 42:High
LineFormat
2:TTL,
5:OptoCoupled,
7:Internal Signal
ー
Display the signal format.
Off, 10us, 100us,
500us, 1ms, 5ms,
10ms
Off
Select the filter to remove noise from the OptIn input signal of Digital I/O.
0: UserOutput0
1: UserOutput1
2: UserOutput2
3: UserOutput3
UserOutput0
Set the UserOutput signal.
UserOutputValue
True, False
False
Set the value for the UserOutput selected in [UserOutputSelector].
Item
DigitalIOcontrol
LineSelector
OptInFilter
UserOutputSelector
—
5
9
—
AP-3200T-10GE