JBE-P2L1 Panel Manual V1.2 EN
Page 9
Release Date: January 5, 2021
Rev 01
4.2.5 Mounting to the wall
1.
Before starting installation, verify that the wall at the desired location is appropriate and suitable for
the weight and environmental requirements of the panel.
2.
Based on
Error! Reference source not found.
, verify the clearance around the panel in the d
esired area and measure the location of the centering hole on the wall.
Figure 1: Mounting Holes
3.
Use the appropriate mounting hardware to secure one screw into the wall, at the height of the user’s
eyes. Leave the screw protruding approximately 5 mm from the wall, as illustrated in Figure 3. This
screw will bear the weight of the panel, while leveling it to mark the hole positions in the wall. Thanks
to this screw, the operation can be performed by a single operator
Figure 2: First screw for center keyhole
