JBE-P2L1 Panel Manual V1.2 EN
Page 12
Release Date: January 5, 2021
Rev 01
4
. Secure all incoming wires to the cabinet with the provided tie wraps.
Figure 6: Illustration of Secured Wiring
4.2.7 Fitting the batteries
This product shall be used only with the approved battery types shown. Note that the appropriate battery
size depends on whether the optional battery box JBE-BAT has been installed or not:
a)
System with primary cabinet only (6.3 mm Faston tab terminals
)
•
2x Yuasa NP7-12LFR (7 Ah of C20 capacity
)
•
2x Yuasa NP12-12FR (12 Ah of C20 capacity
)
b)
System with optional battery box (Ø5 mm ring terminals
)
•
2x Yuasa NP17-12IFR (17 Ah of C20 capacity
)
Use always new batteries in configurations of two (2) identical capacities to provide adequate power for
standby use. Do not mix different battery capacities. Observe the battery manufacturer’s recommendation
on shelf life and expected service life.
Note that batteries pose severe hazards. Read the safety manual of the batteries before handling them.