JBE-P2L1 Panel Manual V1.2 EN
Page 38
Release Date: January 5, 2021
Rev 01
Figure 18: Example Output Action
Reviewing the action
Once an action’s programming has been entered into the panel configuration, it can be reviewed in a
single screen with the coding below:
Input scenarios combination = Output programs triggered
Where the input scenarios are coded as S(Zone, alarm type, quantity) and the programmed outputs
programmed are coded as P(group number, delay, hold ).
OR aggregations of inputs are coded with the addition “+” sign.
AND aggregations of inputs are coded with the product “x” sign.
That is: Scenarios S(x,y,z) are considered to return “1” if they are met and “0” otherwise. All output groups
at the right
most hand side of the “=” sign will be activated if the calculation of input functions returns “1".