Jade Bird JBE-P2L1 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 56

background image

JBE-P2L1 Panel Manual V1.2 EN

Page 7

Release Date: January 5, 2021

Rev 01

Note that the Main panel, the printer box and the battery box stack together. Therefore, when these 3 parts
are used, the total dimensions of the assembly are (WxHxD) = 440x740x126 mm and a total weight of 19 kg
(including 2x17 Ah batteries). The accessory modules are not intended to be installed separate from the
main fire panel.

Installation in areas with high levels of electromagnetic interference should be avoided.

The height of the Draco panel’s LCD should be at the user’s eye level. This will provide for ideal readability
of the LCD screen.

4.1.3 Planning wire topology to meet EN 54-2 requirements on integrity of transmission

paths.

EN 54 and installation guidelines require that the effects of a wiring fault do not affect more than 32 initiating
devices (detectors or MCPs). In order to meet these requirements, detection circuits with more than 32
devices shall be installed in a redundant loop (class A) wiring topology with the addition of compatible JBE
isolators installed at least every 32 initiating devices.

Installations with less devices (

≤32) per detection circuit can be installed in non-redundant stubs (class B).

Note that each loop of the Draco fire panel can drive up to 2 stubs.

4.2

Physical mounting instructions

4.2.1 Panel assembly

The Draco fire panel is supplied fully assembled and ready to be installed into a wall. The following
accessories can be acquired separately and will need to be assembled to the fire panel prior to its wall
mounting.

Table 7: Accessories optional

Draco 2nd Loop Card

JBE-P2L1-EXLP

Draco Printer

JBE-PRT

Draco Battery Box

JBE-BAT

4.2.2 Assembly of JBE-P2L1-EXLP (Draco 2nd Loop Card)

1.

While the panel is unpowered, open the fire panel’s cabinet using the provided key.

2.

Align the connectors in the JBE-P2L1-EXLP expansion board with the connectors J2 and J4 of the
main loop card (JBE-P2L1-LOOP) and push firmly.

3.

Affix the expansion loop card to the existing loop card using the two provided M3 spacers and
screws.

«
...
10
11
12
13
14
...
»

Содержание JBE-P2L1

























































Отзывы:

Нет отзывов

Похожие инструкции для JBE-P2L1

Бренд: Cansec Страницы: 45

Бренд: Cansec Страницы: 43

Бренд: Cansec Страницы: 32

Бренд: Samson Страницы: 32

Бренд: Quantum Страницы: 15

ROBO Cylinder RCP2 Series

Бренд: IAI Страницы: 5

Бренд: National Instruments Страницы: 40

Бренд: National Instruments Страницы: 28

Бренд: National Instruments Страницы: 7

Бренд: National Instruments Страницы: 22

Бренд: µ-Dimension Страницы: 48

Бренд: µ-Dimension Страницы: 2

Бренд: Vertiv Страницы: 2

Бренд: Quantum Страницы: 20

Бренд: ECKELMANN Страницы: 147

Бренд: McIntosh Страницы: 60

Бренд: Ruida Technology Страницы: 45

TrueAlarm 4100 Series

Бренд: Simplex Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды