Jadak Photo Research PR-810, Руководство пользователя

Страница: 104 / 120

96
PR-805/810/810
L
User Manual
Setup
Command
Description
SL
Analog Output (Optional)
Enable analog output. For analog output operations the shutter must be set to OPEN
following a measurement.
Syntax : SLa[CR]
Where: a = Enable/Disable Analog Output
0 = Disable
1 = Enable
Response : 0000[CR][LF] If all OK, else
NNNN[CR][LF] (NNNN = Error code) [CR][LF] (NNNN = Error code)
SN
Cycles to Average
Defines the number of measurements (cycles) to average. The range of cycles to average is
1 to 99. The default is 1.
Syntax : SNaa[CR]
Where : aa = Cycles to Average Range 1 to 99
Response : 0000[CR][LF] If all OK, else
NNNN[CR][LF] (NNNN = Error code)
SO
CIE Observer
Photometric and Colorimetric values can be calculated using either CIE 2

or 10

Standard
Observer data sets. Use this specifier to choose the CIE data set for calculations for the next
measurement. The default is 2

.
Syntax : SOn[CR]
Where : n = CIE Observer
2 = 2

10 = 10

Response : 0000[CR][LF] If all OK, else
NNNN[CR][LF] (NNNN = Error code)
SP
Primary Accessory
A Primary Accessory is one that replaces the standard objective lens (typically the MS-75)
during use and can be used in conjunction with an Add-on Accessory.
Syntax : SPnn[CR]
Where : nn = Accessory Code
Response : 0000[CR][LF] If all OK, else
NNNN[CR][LF] (NNNN = Error code)
Note: Accessory Codes can be found by running report 116 (command D116). See the Data
Codes section for specific details.