Jabiru J450, Руководство конструктора, Страница: 319 / 343

Jabiru J450 Constructors Manual
Testing>Final inspection checklist
Tuesday, April 6, 2010 319 of 343
Exterior
Wings: LEFT RIGHT
1 Root bolts inspected (correct tension) x 2
 
2 Strut bolts x 2 inspected, correct tension
 
3 Warning decals in wing roots x 2 [Do Not Tighten]
 
4 Wing root cover strips secure
 
5 Upper strut fairing secure and clear of strut
 
6 Lower wing strut/belly fairings secure
 
Flaps
1 Hinge points secure with pivot bolts in safety
 
2 Pushrod rod ends secure and not binding in any position
 
3 Safety hole in rod ends is within limits
 
4 Jam nuts on rod ends secure
 
5 Pushrods not fouling on cover strips
 
6 Drive shaft output secure
 
7 Drain holes have been drilled
 
8 Flap operation:
a) flaps up
 
b) first stage – half flap
 
c) second stage – full flap, not fouling fuselage
 
9 Flap slot gap even, smooth and the same size on both wings
 
Fuel caps
1 Filler caps secure in fuel filler body
 
2 Earth wires secure from caps to breather fitting in tank
 
3 Quick drain: operation and lock wired
 
4 Decals in place and correct
 