![background image](http://html1.mh-extra.com/html/jabiru/2200/2200_maintenance-manual_3120265090.webp)
Engine Maintenance Manual
Jabiru Aircraft
Pty Ltd
JEM0002-5
Jabiru Model 2200 & 3300 Aircraft Engines
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
ISSUE
1
2
3
4
5
Dated : 2nd June 2015
Issued By: AS
Page: 90 of 103
L:\files\Manuals_For_Products\Engine_Manuals\Engine Maintenance Manual 22 & 33\JEM0002-5.docx
11.2
50 hour, 100 hour and Annual Inspection Worksheet
This worksheet provided covers all inspection tasks required for 50 hour, 100 hour and Annual
inspections. Tasks listed
‘Annual’ need only be done annually. ‘100 hourly’ tasks are to be
completed at both annual and 100 hour inspection intervals.
‘50 hourly’ tasks are to be completed
at three inspection intervals; Annual, 100 hours and 5
0 hours. ‘P’ indicates pass, ‘F’ indicates fail,
the ‘Comments’ column should be used to note condition, parts replaced, etc.
IMPORTANT:
READ ALL INSPECTION AND MAINTAINANCE REQUIREMENTS IN THIS
MANUAL (JEM0002) BEFORE USING THESE CHARTS / WORKSHEETS
AIRCRAFT MAKE/MODEL..............................................REGO...........................S/N........................
ENGINE MAKE/MODEL..................................................S/N................................
TT AIRFRAME....................................................TT ENGINE..............................................................
INSPECTION TYPE (circle)......................50 hourly.......................100 hourly.........................Annual
11.2.1 Engine & Engine Compartment (refer to section 8.8)
CARRIED OUT BY (print name).....................................(signature)...............................(date)............
1) Engine cowlings and Clips
– Remove and check for damage and wear
2) Inspection of engine compartment (pre cleaning)
– Inspect engine dirty
3) Clean engine & compartment
– Clean in accordance with section 7.3
4) Engine pre inspection test run
– Test run engine before maintenance, check for
abnormalities
5) Inspection of engine compartment
– Inspect engine clean, check torque seal on through
bolt nuts
6) Cylinders
– Inspect for excess oil leakage, cracks, discolouration and other damage / wear
7) Check spark plug gaps
– Adjust within limits of section 3.4
P
F
Comments:
100
hourly
P
F
Comments:
50
hourly
P
F
Comments:
100
hourly
P
F
Comments:
50
hourly
P
F
Comments:
100
hourly
P
F
Comments:
50
hourly
P
F
Comments:
50
hourly