![background image](http://html1.mh-extra.com/html/jabiru/2200/2200_maintenance-manual_3120265101.webp)
Engine Maintenance Manual
Jabiru Aircraft
Pty Ltd
JEM0002-5
Jabiru Model 2200 & 3300 Aircraft Engines
This document is controlled while it remains on the Jabiru server. Once this no longer applies the document becomes uncontrolled.
ISSUE
1
2
3
4
5
Dated : 2nd June 2015
Issued By: AS
Page: 101 of 103
L:\files\Manuals_For_Products\Engine_Manuals\Engine Maintenance Manual 22 & 33\JEM0002-5.docx
14 Revisions
Issue
List of Changes
Issued By
Date
1
Initial Issue
DS
2
Section 5.10: add requirement to check for inhibitor in
carburettor bowl. Section
8
: add inspection for top valve spring
washer. Section
8
: add inspection for torque seal on through-
bolts. Section
4
: new location for Airworthiness Limitations.
Maintainer requirements and formatting added
AS
08/04/14
3
- Include both Australian Maintainer types (L1, L2, LAME etc)
and American Maintainer types (Owner, A&P, LSA)
-
Add ‘Required Tools’, ‘Parts and Materials’ and ‘Return to
Service’ for each individual task
- Add Source of Purchase parts in General Information Section
- Add List of disposable parts in General Information Section
-
Add ‘Revisions’ Section 14
AS
05/05/14
4
- Add requirement for 100 hourly flywheel screw replacement for
non-approved propellers.
- Add requirement for inhibitor application inside the rocker
covers for non-flyable storage.
- Add Flywheel screw basic visual inspection procedure
(conducted every 50 hours)
- Reclassification of required Level of Certification for several
tasks
- Correct minimum full power oil temp to 40
o
C (104
o
F)
- Correct torque settings for Flywheel screw detailed inspections
(section 9.23)
- LSA Owner/Operator responsibilities added
AS
22/07/14
29/07/14
15/09/14
15/10/14
22/10/14
28/10/14
5
- Spark plug torque setting corrected (section 3.11)
- Clarify 500hourly flywheel bolt mandatory replacement
- Correct Distributor Cap part number in section 2.12
- Change max oil pressure for hydraulic lifter engines to 350kPa
- Correct Ignition harness, distributor caps & rotors to 100 hourly
- Sump bung torque setting corrected (section 3.11)
- Distributor maps drawn from distributor cap end (Figure 6)
- Revise electrical system specifications (section 3.13)
- Remove reference to JSL018 in section 9.11.1
- Change the order of the worksheet (section 11.2)
AS
26/11/14
9/12/14
10/12/14
10/03/15
12/03/15
16/03/15
17/03/15
01/04/15
04/05/15