IXIA BreakingPoint Storm, Руководство по установке

Страница: 49 / 62

FireStorm ONE Installation Guide 41 BreakingPoint Systems Inc. ©2005-2015
Frequently Asked Questions
This section provides answers to some of the most frequently asked questions. If you have any
questions you would like added to this section, please send them to
support@ixiacom.com.
Account Questions
Question:
I’ve had 4 invalid login attempts to the Control Center, and my account is now locked.
How do I unlock my account?
Answer: Close the Control Center window and open a new browser window.
Question: How do I reset my Control Center account password?
Answer:
You can have another user log into the Control Center to reset your password; you can
log into the BPS Management port to reset the password; or you can telnet to the system’s
management IP address to reset the password.
Question:
How do I create a Strike Center account?
Answer: Go to Strike Center and click the Register link located under the Account Options
area. Enter your customer ID and license key in the corresponding fields, and click Validate . If
you don’t have your customer ID or license key, please contact the BreakingPoint Systems support
team at support-bps@ixiacom.com or call 1-818-595-2599.
The Create Account page will display, which will allow you to create a new Strike Center account.
Question: I forgot my Strike Center password. How do I retrieve it?
Answer:
Go to
Strike Center
and click the
Register
link located under the
Account Options
area. You will need to have your customer ID and license key to log in; if you do not have this
information, please contact BreakingPoint Systems support team at support-bps@ixiacom.com or
call 1-818-595-2599.
After you log in, locate your account and click the
Reset
link located next to it. The Password
Reset screen will display, which will allow you to reset your account’s password.
Question:
Does each user need a Strike Center account?
Answer: No. It is not necessary for each user to have a Strike Center account; however, if you
have multiple boxes, you may want to create an account for each box.
Addressing Questions
Question: How do I configure the system to use one MAC address per host?
Answer: If you edit the Network Neighborhood selected for your test, you can select “Host” as the
type for the domain. This will allot one MAC address per host; selecting “Virtual Router” will use
one MAC address total for all traffic from that subnet.