IXIA BreakingPoint Storm, Руководство по установке

Страница: 13 / 62

Control Center Overview
FireStorm ONE Installation Guide 4 BreakingPoint Systems Inc. ©2005-2016
Figure 1-2:
BreakingPoint Start Page
To access the Control Center:
1. Open a Web browser.
Note: After upgrading or reverting to any release of the BreakingPoint Firmware, you must
clear your cache and refresh your browser.
Note: The default address is http://10.10.10.10; however, the host address may have changed
during the initial configuration of the system. You will need to contact the System
Administrator for the current host address.
2. Enter the host address for the BPS Management port in the Address bar.
3. Click the Launch BreakingPoint Systems Control Center link on the Start Page.
Note: The first time you attempt to login to the system, your browser will require you to verify
a security exception in order to login. Follow the steps required by your browser to
accept and verify the security exception. Once the security exception has been accepted
and verified, you will be allowed to continue with the login process. A new window will
open and display the Control Center login page.
4. Enter the login ID in the Username field.
5. Enter the password in the Password field.
Note: Passwords are case sensitive.
6. Click the Login button.
Note: The system allows three invalid logins. If invalid login information is entered on the
fourth attempt, the login window will lock the user out. Users must refresh their browser
to unlock their accounts.