IXIA BreakingPoint Storm, Руководство по установке

Страница: 21 / 62

Task 4: Accessing the BreakingPoint Control Center
FireStorm ONE Installation Guide 12 BreakingPoint Systems Inc. ©2005-2016
To enable JavaScript for Mozilla Firefox 23:
1. In the address bar, type
about:config
and press
Enter
.
2. Click
"I'll be careful, I promise"
.
3. In the search bar, search for
javascript.enabled
.
4. Right click the result named j
avascript.enabled
and click
Toggle
. JavaScript is now
disabled.
To re-enable JavaScript, repeat these steps.
To enable JavaScript for Safari:
1. Open a Safari browser window.
2. Select
Preferences
from the Safari menu.
3. Click the
Security
option from the top of the window.
4. Select the
Enable JavaScript
option located under the Web Content section.
5. Close the Security window.
You must also have the host address that has been set for the BPS Management Port and the
BreakingPoint Control Center login information.
Note:
The chassis must already be installed and configured before the BreakingPoint Control
Center can be accessed. For more information on installing and configuring your
BreakingPoint device, see your BreakingPoint device’s installation guide.
Browser Resources
Please note that if you have several browser windows open simultaneously, or if you have multiple
instances of the BreakingPoint Control Center open, this may cause lagging or delayed responses
from the system. This is normal behavior for the BreakingPoint Control Center if multiple browser
resources are being used.
Note:
BreakingPoint recommends clearing your cache and refreshing your browser after
upgrading or reverting to any release of the BreakingPoint.
Navigational Overview
This section provides an overview of the navigational areas in the BreakingPoint Control Center.
The BreakingPoint Control Center is divided into two main areas: the BreakingPoint Control
Center Menu bar and the navigational buttons. See
Figure 2-2 on page 13 for a tour of the interface.