IXIA BreakingPoint Storm, Руководство по установке

Страница: 25 / 62

Task 7: Creating a Device Under Test Profile
FireStorm ONE Installation Guide 16 BreakingPoint Systems Inc. ©2005-2016
Figure 2-3:
Creating a DUT Profile
To create a DUT Profile:
1. Select Control Center > Device Under Test from the BreakingPoint Control Center Menu
bar.
2. Select a profile from the Profile Name list to clone.
3. Click the Clone the selected DUT button.
4. Enter a name for the DUT Profile in the Name field and click the OK button.
5. Click the Device Selection dropdown button and select a device type. (Optional)
Note: Each device type has its own set of global commands. Select the device type that best fits
your device.
6. Click the Connection Type dropdown button and select Telnet, SNMP, SSH, or Serial.
Note: If you have selected Serial , the DUT must be plugged into the chassis through the BPS
Management serial port. If you have selected Telnet or SSH, the DUT must be plugged
into the chassis through the BPS Management Ethernet port.
7. Define the connection parameters for the DUT under the Connections Settings area. For
more information on connection parameters, see the section Connection Parameters in the user
guide for a list of valid parameter values.
8. Enable or disable any global commands from the Global Commands list.
Note: All cloned DUT Profiles will inherit the active global commands from its parent DUT
Profile. For more information on commands, see the section Commands in the user
guide.