IXIA BreakingPoint Storm, Руководство по установке

Страница: 26 / 62

FireStorm ONE Installation Guide 17 BreakingPoint Systems Inc. ©2005-2016
9. Click the
Apply
button.
Task 8: Creating a Network Neighborhood
A Network Neighborhood consists of all the domains for each test interface. The domains consist
of subnets, which set the range of source and destination addresses for the test traffic sent/received
by the interface.For each test component, you will need to specify the domain that the component
will use to obtain the source and destination addressing for its traffic.
Each domain can consist of a single subnet, or it can have multiple subnets depending on whether
or not the domain supports VLANs. All VLAN-enabled domains can have more than one subnet;
any other type of domain can only have one.
Note:
The system randomly selects VLAN IDs from the Network Neighborhood; therefore, some
VLAN IDs may be used multiple times, whereas others may not be used at all.
This task is broken into four parts:
1. Creating a Network Neighborhood.
2. Adding a domain to the Network Neighborhood.
3. Defining the subnet for the domain.
4. Adding additional interfaces to the Network Neighborhood (for two-blade chassis).
Creating a Network Neighborhood
This section describes how to create a Network Neighborhood.