IXIA BreakingPoint Storm, Руководство по установке

Страница: 33 / 62

Task 10: Creating a Test
FireStorm ONE Installation Guide 24 BreakingPoint Systems Inc. ©2005-2016
5. Click the
Accept
button once you have made selections for the DUT Profile and Network
Neighborhood.
6. Click
Add a test component
from the Test Quick Steps menu.
7. Select the test component to be added to the test.
8. Do any of the following:
• Click the
Information
tab.
n
Enter a new name for the test component in the
Name
field. (Optional)
n
Enter a new description for the test component in the
Description
field. (Optional)
n
Enable or disable the
Active
check box. (Optional)
n
Enable or disable the Include in Report check box. (Optional)
n
Click the
Apply Changes
button when done.
• Click the Interfaces tab.
n
Select the interface(s) that will act as the client. The interface(s) you select must be mapped to a port.
n
Select the interface(s) that will act as the server. The interface(s) you select must be mapped to a port.
n
Click the
Apply Changes
button when done.
• Click the Presets tab.
n
Select a Component Preset.
n
Click the
Apply Changes
button when done.
• Click the
Parameters
tab.
n
Adjust any parameters for the test component.
n
Edit the Evasion Profile settings.
(Optional, for the Security component only)
n
Click the
Apply Changes
button when done.
9. Repeat Step 6-8 for each test component you want to add to the test.
10. Click the
Define Test Criteria from the Test Quick Steps menu and create the pass/fail
criteria for the test. For more information on pass/fail criteria, see the section Test Pass/Fail
Criteria in the user guide.
11. Click the Save As button.
12. Enter a name for the test in the Name field.
13. Click Save and Run from the Test Quick Steps menu to run the test.