IXIA BreakingPoint Storm, Руководство по установке

Страница: 11 / 62

Control Center Overview
FireStorm ONE Installation Guide 2 BreakingPoint Systems Inc. ©2005-2016
Control Center Overview
The Control Center is a Web-based user interface where the testing environment can be created,
tests can be run, and reports can be viewed. The Control Center is accessible through a Flash-
enabled Web browser – such as Internet Explorer, Mozilla Firefox, Safari, and Opera. You must
also have JavaScript enabled to view the Control Center.
Note:
Safari 6.0.2 on Mac OS 10.8.2 and Safari for Windows are not supported. Mac users with
OS 10.8.2 can use Firefox or Chrome as their browser.
Note: BreakingPoint recommends that users of Internet Explorer use IE 10 or higher. IE 9 and
earlier versions are not supported.
Enabling JavaScript
You must have JavaScript enabled to view the Control Center.
To enable JavaScript for Internet Explorer:
1. Open an Internet Explorer browser window.
2. Select
Tools > Internet Options
from the Menu bar.
3. Select the
Security
tab.
4. Click the
Custom Level
button.
5. Scroll down to the
Scripting
section.
6. Find the category called
Active Scripting
.
7. Click the
Enable
button for this category.
2 Hard drive tray Contains the hard drive enclosure. A flashing
power tray indicates that the FireStorm ONE is
connected to an improper power supply
configuration. When connecting power to your
FireStorm ONE, be sure to use only the power
supply that was shipped with our FireStorm
ONE appliance.
3 Target Control Serial Port Used to manage and configure settings for the
DUT.
4 Target Control Ethernet Port Used to manage and configure settings for the
DUT.
5 BPS Management Serial Port Manages the FireStorm ONE configuration
through a serial connection.
6 BPS Management Ethernet
Port Manages the FireStorm ONE configuration
through an Ethernet connection.
7 USB Port Provides a USB connection for an external
memory device.
Callout Component Description