IXIA BreakingPoint Storm, Руководство по установке

Страница: 32 / 62

FireStorm ONE Installation Guide 23 BreakingPoint Systems Inc. ©2005-2016
4. Select the Reserve/Unreserve all ports on this slot option.
Task 10: Creating a Test
This section describes how to create a test from start to finish; this includes selecting the Network
Neighborhood and DUT Profile, adding a test component, configuring the test component, and
running the test.
Figure 2-6:
Creating a Test
To create a test:
1. Select Test > New Test from the BreakingPoint Control Center Menu bar.
2. Click Select the DUT/Network from the Test Quick Steps menu.
3. Select a DUT Profile from the Device Under Test(s) list.
Note: Click the Open device under test screen link to modify the DUT Profile. Once you
have made your changes, click the Return button to go back to the DUT and Network
Neighborhood selection screen. For more information on DUT Profiles, see the section
Task 7: Creating a Device Under Test Profile on page 15 .
4. Select a Network Neighborhood from the Network Neighborhood(s) list.
Note: Click the Open network neighborhood screen link to modify the Network
Neighborhood. Once you have made your changes, click the Return button to go back to
the DUT and Network Neighborhood selection screen. For more information on Network
Neighborhoods, see the section
Task 8: Creating a Network Neighborhood on
page 17 .