REL0.2
Page 35 of 110
iWave Systems Technologies Pvt. Ltd.
Zynq Ult MPSoC (ZU11/17/19EG) SOM DevKit Hardware User Guide
2.4.7
Debug UART
The Zynq Ult MPSoC (ZU11/17/19EG) Carrier Board supports debug interface through UART0 interface of Zynq
Ult MPSoC (ZU11/17/19EG) PS. This UART0 signals from Board to Board Connector2 is connected to UART to
USB Convertor “FT232RQ”
. The output of the USB convetor is conencted to USB MicroAB Connector (J13). This USB
MicroAB Connector can be used for Debug purpose which is is physically located at the top of the board as shown
below.
Figure 17: Debug UART Connector